5.8 kW Charge controller with 1 MPPT trackers. DC input up to 150 V, MPPT range 49–145 V.
Max DC voltage
150 V
MPPT voltage range
49–145 V
Start-up voltage
53 V
Max input current per MPPT
70 A
Max short-circuit current
70 A
Nominal AC power
5.8 kW
MPPT configuration
1 MPPT × 3 strings
Max DC power input
5.8 kW
Inverter type
Charge controller
The Victron Energy SmartSolar MPPT 150/100 is a 5.8 kW inverter suitable for residential and commercial solar installations. The panel matcher above shows all compatible solar panels with optimal string configurations calculated automatically based on voltage, current, and temperature limits.
Use our string sizing calculator for a detailed 7-check compatibility analysis with temperature-adjusted voltage and current calculations.
The Victron Energy SmartSolar MPPT 150/100 has 1 MPPT tracker(s), each supporting 3 input string(s). The exact panel count per string depends on your panel's Voc relative to the MPPT range 49–145 V. Use the matcher above to find the optimal configuration automatically.
The Victron Energy SmartSolar MPPT 150/100 MPPT accepts DC voltages between 49 V and 145 V. At summer temperatures, the string Vmpp must stay above 49 V. At winter temperatures, the string Voc must not exceed the absolute DC limit of 150 V. The matcher calculates these temperature-adjusted checks automatically.
Yes — the Victron Energy SmartSolar MPPT 150/100 is compatible with any solar panel brand as long as the string voltage and current stay within its electrical limits. Panel brand does not affect compatibility. What matters is that the string Voc at coldest temperature stays below 150 V, Vmpp stays within 49–145 V, and total current stays below 70 A.