StecaGrid 10000 3ph

9500 W1 MPPT350–700 VThree-phaseIP54Market: Australia & NZ · Europe & UK

Find on AmazonCheck current price and availability

As an Amazon Associate, Solar Stack earns from qualifying purchases.

The Steca StecaGrid 10000 3ph is a 9500 W solar inverter with 1 MPPT trackers. Below are the verified electrical specifications extracted from the manufacturer datasheet.

Technical Specifications

DC Input

Max DC Input Voltage: : 845 V
MPPT Voltage Range: : 350–700 V
Max Input Current (per MPPT): : 32 A
Max Short-Circuit Current (per MPPT): : 36.8 A
Start-up voltage: : 350 V
Max DC Input Power: : 10,800 W

AC Output & System

Nominal AC Output Power: : 9,500 W
AC phases: : Three-phase
Peak efficiency: : 96.3 %
MPPT Trackers: : 1
Strings per MPPT: : 5
Type: : String
Battery port: : No

Enclosure & service

Protection rating: : IP54
Dimensions (W × H × D): : 400 × 847 × 225 mm
Weight: : 42 kg
Noise at 1 m: : 60 dB

Best panel configuration

The fully compatible panel setup from our catalog that makes the best use of this inverter, calculated for -20°C to 35°C.

JinkoSolarTOPCon

JKM435N-54HL4R-(V)

Compatible

10.4 kW

24 panels of 435 W

≈9.2 kW in summer heat (-12%)

How to wire it · 12 per string

MPPT 1
2 strings

Panel area: 48.0 m²
Panel weight: 504 kg
DC/AC ratio: 1.10×

Check in calculator All compatible panels

Datasheet

Download PDF0.4 MB

Sourcekontron-solar.com

Other Models in This Series

Model	AC Power	Max DC V	MPPT range
StecaGrid 8000 3ph	8000 W	845 V	350–700 V
StecaGrid 10000 3phCurrent	9500 W	845 V	350–700 V

Check in calculator

Verify string compatibility with this inverter

Find compatible panels

See which solar panels work with this inverter

Compare with another

Put this inverter side by side with up to four others